Home Exterior Product Reviews Peoria IL

ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic.

Midwest Foundation Corporation
(309)925-2831
22370 Illinois Route 9
Tremont, IL
Retro-Tech Inc.
(309) 682-0675
625 W Main
Peoria, IL
Peoria Construction Company
(309) 673-5600
1212 SW Adams St
Peoria, IL
FGM Architects, Inc.
(309) 669-0012
202 NE Madison Avenue
Peoria, IL
TRICON (Tri-County Construction Labor
(309) 637-0934
124 SW Adams
Peoria, IL
Foster-Jacob, Inc.
(309) 674-8129
826 W. Main St
Peoria, IL
PEORIA DRYWALL
309.922.0600
PO BOX 3421
PEORIA, IL
Kelly Seed & Hardware Company
(309) 674-0368
202 Hamilton Boulevard
Peoria, IL
LZT Associates Inc./ Larson & Darby Group
(309) 673-3100
124 SW Adams Street
Peoria, IL
AmerenCILCO
(309) 677-5271
300 Liberty St
Peoria, IL
Data Provided by:
 
Provided By:

Home Exterior Product Reviews

By PRO SALES Staff

A Air Vent ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic. The baffle also deflects rain and snow while the internal weather filter provides a barrier against weather, dust, and insect invasion. 800.247.8368. www.airvent.com .

B TimberTech Featuring a skid-free, splinter-free surface that resists fading, weathering, rotting, and warping, DockSider composite planks are ideal for dock, marina, and boardwalk structures. The planks span 24 inches on-center and have a 1¼-inch-by-5½-inch square-edge profile that withstands exposure to moisture and heavy traffic. DockSider comes in 12-, 16-, and 20-foot lengths. 800.307.7780. www.timbertech.com .

C CertainTeed Triple 3 1/3-inch solid vinyl panels can be used for soffit where vented panels are not required, as well as for vertical siding applications. The panels feature a flat face design with a low-gloss matte finish to provide the look of painted wood. Sharp edges are formed by the deep dovetails between panel profiles and a ¾-inch projection creates sharp definition, the maker says. 800.233.8990. www.certainteed.com .

D Vinyl Visions Maximum Vinyl Products' Cambium vinyl fencing is c...

Click here to read full article from Pro Sales Magazine